NetLinx Header Data
23 February 2007, 16:56 by Chad Reynoldson
I have done research on the default settings for username/password of popular routers from AMX and from Linksys (I haven’t seen DLink yet, so if you have it, drop me an email).
I have added this information to the top of my Netlinx program (see below). If I get on-site and cannot remember the default username/passwords, I can look it up. I’ve been burned many times in the field without internet connectivity and I try all of the various combinations with no luck.
(*---------------------------------------------------------*) (* AMX WAP-200 Defaults: *) (* Username: Admin *) (* Password: 1988 *) (* IP: 192.168.1.240 *) (* SSID: AMX *) (* *) (* Linksys Defaults: *) (* Username: admin (BEFW11S4, WRT54G) *) (* Administrator (EtherFast Cable/DSL rtrs) *) (* comcast (Linksys comcast routers) *) (* [none] (All other Linksys routers) *) (* Password: [none] BEFW11S4 *) (* 1234 (Linksys comcast routers) *) (* admin (all other Linksys routers) *) (* IP: 192.168.1.1 (router) *) (* 192.168.1.250 (WAP-11) *) (* 192.168.1.245 (WAP-54G) *) (* SSID: linksys *) (* *) (*---------------------------------------------------------*)
Share This Article
Comments
Comments are turned off for this article.