Polycom HDX9000 Camera Control
20 February 2008, 11:31 by Chad Reynoldson
I have just found that camera control through the Polycom HDX9000 series codecs require repeating commands. The commands themselves seem to provide “continuous” operation with a start and stop command. However, I had to implement HOLD[1,REPEAT] to get the cameras to operate continuously.
An update here and anyone who has worked with Polycom before will not be surprised by this. The Polycom firmware was updated to 2.0.1.2350 and now the continuous camera commands will work with start/stop. Of course, with the updated firmware, the repeating camera commands now act sluggish.
Share This Article
Comments
Comments are turned off for this article.