Tandberg MXP with TVS
7 July 2009, 08:48 by Chad Reynoldson
I had recently programmed an AMX control system that controlled a Tandberg 6000MXP codec that utilized an external camera switcher, the Tandberg TVS. It took some time to make it work and here is what I learned.
Switching the camera input requires two separate commands. First, you switch the TVS using the “xconfiguration Switch Source: <1-6>“ command. Then you need to switch the MXP to it’s main video source using the “vidin 1” command.
Now when controlling the selected TVS camera, you need to use camera values 8-13 like this: “xcommand cameramove camera:<8-13> direction:
Share This Article
Comments
No Current Comments